본문 바로가기

카테고리 없음

Software Arsip Digital Thermometer

Home, Office, Car, etc: Home & Kitchen,Digital Thermometer, Asixx Electronic LCD Digital Temperature Meter Thermometer with Wired Probe Sensor for Refrigerator. Asixx Electronic LCD Digital Temperature Meter Thermometer with Wired Probe Sensor for Refrigerator Office Digital Thermometer etc Car Home Office Asixx Electronic LCD Digital Temperature Meter Thermometer with Wired Probe Sensor for Refrigerator etc Home Digital Thermometer Car Office Car Home etc Asixx Electronic LCD Digital Temperature Meter Thermometer with Wired Probe Sensor for Refrigerator Digital Thermometer Asixx Electronic LCD Digital Temperature Meter Thermometer with Wired Probe Sensor for Refrigerator Office Digital Thermometer etc Car Home.

Circuit DescriptionFigure 1 depicts circuit diagram of the DigiThermo. The MCU is ATMEL 89C4051 CMOS Microcontroller having 4kB code memory, 128 bytes On-chip RAM and 8-bit Port1 and Port3. The A/D chip is HARRIS CA3162, 3-digit DVM. The A/D converter employs dual-slope integrator providing 10Hz sampling rate. Digital output sent to MCU is multiplex four bit BCD started from MSD, LSD and NSD respectively.

The MSD signal was tied to P3.7 indicating first digit ready to be read. Integrating capacitor is a 330nF Polyester type.

Software Arsip Digital Thermometer

The 10k POT connected to pin13 is a gain adjustment and 50k POT to pin 8 and 9 is for zero adjustment. The input of the converter is true differential pin 11 for HI and pin 10 LO signal. Temperature was measured by a precision solid-state sensor from National Semiconductor, LM35D.

Software Arsip Digital Thermometer Instructions

The output signal is 10mV/°C. Since the A/D converter is capable of providing 0-1000mV reading with 1mV resolution, thus the converter can resolve 0.1°C (not absolute accuracy). A 100k and 0.02uF forms a first order low-pass filter used to be front-end hardware filtering. The 16x1 line LCD is connected in 4-bit interfacing to P1.4-P1.7 with control signal RS and E to P3.4 and P3.5 respectively. The +5V power supply uses a 78L05 TO92 case with external +9V adapter.Informasi lengkap, gambar rangkaian lengkap, dan keterangan yang lebih bagus, silahkan lihat di situs ini: ' http://chaokhun.kmitl.ac.th/%7Ekswichit/thermo/digithermo.htm'.